OMNI-UD-210

USB over IP Device Transceiver

תמונות גדולות יותר

ה-BSS OMNI-UD-210 הוא נקודת קצה של התקן USB הפועלת יחד עם נקודת הקצה של מארח USB מדגם OMNI-UE-210 להרחבה וניתוב USB 2.0 ברשת ברמה מקצועית על גבי Gigabit Ethernet. תוכנן עבור סביבות שיתוף פעולה וחינוך מודרניות, ומערכת OMNI 200 זו מאפשרת למארחי USB לתקשר עם מצלמות, סרגלי ועידה, מסכי מגע והתקני USB אחרים בין חדרים או מתקנים.

ה-OMNI-UD-210 כולל יציאות USB-C ו-USB Type-A לחיבור התקני USB. הוא מכיל טכנולוגיית Virtual Network USB 2.0 Hub, המאפשרת למחשב מארח USB המחובר ל-OMNI-UE-210 לתקשר עם התקני USB הממוקמים בעד ארבע נקודות קצה OMNI-UD-210 מרוחקות על גבי רשת. עם תמיכה בקצבי נתונים של USB 2.0 של עד 480 Mbps, המערכת מתאימה הן להתקנים בעלי רוחב פס גבוה והן לציוד היקפי USB HID סטנדרטי, ומספקת לאינטגרטורים גמישות בהצבת מצלמות, מיקרופונים, מקלדות, עכברים והתקני USB אחרים בכל מקום שבו הם נדרשים.

בנוסף, ה-OMNI-UD-210 משתלב בצורה חלקה עם פלטפורמת OMNI 600 AV-over-IP, ומאפשר למארחי USB לתקשר עם התקנים בעד ארבעה מפענחי OMNI 600. יכולת תאימות זו מאפשרת אינטגרציית USB ברשת לצד AV, ומרחיבה את אפשרויות תכנון המערכת ליישומי AV ברשת.

ה-OMNI-UD-210 תוכנן להתקנות AV מקצועיות מודרניות, עם תכונות אינטגרציה חיוניות הכוללות הזנת מתח מרחוק PoE+, מצב המתנה בצריכת חשמל נמוכה, וממשקי API פתוחים לשליטה של צד שלישי.

  • USB ROUTING OVER IP

    Virtual Network USB 2.0 Hub technology enables a USB host, connected to a host transceiver or encoder, to communicate with USB devices at up to four remote endpoints, with support for high-bandwidth conferencing devices as well as HID peripherals.

  • שילוב ללא תפרים עם סדרת OMNI 600

    התקני OMNI 200 פועלים לצד מקודדי ומפענחי OMNI 600 מסוג AV-over-IP, ומאפשרים הפצת AV ו-USB באותה רשת

  • ENTERPRISE-GRADE NETWORK SECURITY

    BSS OMNI AV over IP incorporates comprehensive network security features and standards to meet the security and operational requirements of enterprise networks.

  • CENTRALIZED SYSTEM MANAGEMENT

    AVX Suite is the essential resource for BSS OMNI AVoIP system management which includes device discovery and configuration, virtual matrix switching, firmware updates, system monitoring, and more.

USB ROUTING OVER IP

Virtual Network USB 2.0 Hub technology enables a USB host, connected to a host transceiver or encoder, to communicate with USB devices at up to four remote endpoints, with support for high-bandwidth conferencing devices as well as HID peripherals.

שילוב ללא תפרים עם סדרת OMNI 600

התקני OMNI 200 פועלים לצד מקודדי ומפענחי OMNI 600 מסוג AV-over-IP, ומאפשרים הפצת AV ו-USB באותה רשת

ENTERPRISE-GRADE NETWORK SECURITY

BSS OMNI AV over IP incorporates comprehensive network security features and standards to meet the security and operational requirements of enterprise networks.

CENTRALIZED SYSTEM MANAGEMENT

AVX Suite is the essential resource for BSS OMNI AVoIP system management which includes device discovery and configuration, virtual matrix switching, firmware updates, system monitoring, and more.

תכונות

  • USB 2.0 data signal routing and extension over Gigabit Ethernet
  • USB-C and USB Type-A interfaces for USB devices
  • Supports USB 2.0 data rates up to 480 Mbps for high-bandwidth devices and USB HID peripherals
  • Virtual Network USB 2.0 Hub for routing between a USB host and devices at up to four remote locations
  • Mix and match with OMNI 600 Series networked AV encoders
  • Also supports point-to-point USB 2.0 extension
  • Plug-and-play operation with no driver installation necessary
  • 5 watts (5 volts, 1 amp) power available on each USB device interface
  • PoE+ powered with low-power (standby) mode to conserve energy
  • Enterprise-grade network security and standards including IEEE 802.1x, HTTPS, TLS, AES-256 encryption, LDAP, VLAN tagging, and QoS
  • AVX Suite for OMNI 200 system configuration and management
  • HARMAN HControl and BSS Direct Control provide open APIs for third-party control integration

סרטונים

 

 

 

 

הורדות

Brochures
  שפה גודל הועלה
file type icon BSS OMNI Brochure
en עודכן: יול 2026
en  3.85 מגה-בייט יול 2026
CAD Drawings
  גודל הועלה
file type icon OMNI-UD-210 - CAD Drawings
עודכן: אוג 2026
2.93 מגה-בייט אוג 2026
Compliances
  גודל הועלה
596 קילו-בייט אוג 2026
521 קילו-בייט אוג 2026
Quick Start Guides
  גודל הועלה
file type icon OMNI-Ux-210 - Quick Start Guide
עודכן: אוג 2026
393 קילו-בייט אוג 2026
Spec Sheets
  גרסה שפה גודל הועלה
file type icon OMNI-UD-210 Spec Sheet
en גרסה C, עודכן: אוג 2026
en  1.21 מגה-בייט אוג 2026

אם אחד מהקישורים למעלה גורם לתווים מוזרים בדפדפן שלך, לחץ לחיצה ימנית על הקובץ כדי לשמור אותו במחשב שלך.

מפרטים

Ports Gigabit Ethernet port with PoE+ support, USB-C and USB Type-A ports
Environmental Temperature – 32° to 104°F (0° to 40°C)
Humidity – 10% to 90% RH (non-condensing)
Heat Dissipation – 45 BTU/hr
Dimensions (H x W x D) 1.2” x 5” x 3.75” (30.3mm x 127.6mm x 95.2mm)
Product Weight 0.60 lbs. (Approx. 0.27kg)
SKU Numbers BSS-UD210

אביזרים

ACC-MR-NAV10 | 10 Unit Rack Mount Kit with Active Fan Cooling
ACC-MR-NAV10 Main photo
תמונות גדולות יותר
ACC-MR-NAV10 detail thumbnail #1 ACC-MR-NAV10 detail thumbnail #2 ACC-MR-NAV10 detail thumbnail #3 ACC-MR-NAV10 detail thumbnail #4 ACC-MR-NAV10 detail thumbnail #5 ACC-MR-NAV10 detail thumbnail #6 ACC-MR-NAV10 detail thumbnail #7

The BSS ACC-MR-NAV10 is a rack mount accessory that provides ten vertical slots for installing OMNI Networked AV products in an equipment rack. The ACC-MR-NAV10 occupies up to 8 RU of space, including 6 RU for the enclosure and 2 RU to allow ventilation. It provides active cooling with upper and lower trays of cooling fans to ensure ample air circulation. Any unoccupied slots can be covered with the ACC-MR-NAVB1 accessory panel.

The ACC-MR-NAV10 is compatible with the OMNI 600 and 300 Series, as well as the OMNI 200 Series with two units installed side by side.


תיעוד
ACC-MT-NAV1 | 1 Unit Multi-Mount Kit
ACC-MT-NAV1 Main photo
תמונות גדולות יותר
ACC-MT-NAV1 detail thumbnail #1 ACC-MT-NAV1 detail thumbnail #2 ACC-MT-NAV1 detail thumbnail #3 ACC-MT-NAV1 detail thumbnail #4 ACC-MT-NAV1 detail thumbnail #5

The BSS ACC-MT-NAV1 is an accessory for installing an OMNI AVoIP product below a meeting table, or onto a wall or other surface. It provides a secure, screw-mounted connection that allows simple product removal if necessary. A detachable strain relief plate is included for securing cables into place.

In addition to under-table or surface mounting, the ACC-MT-NAV1 can be used for pole mounting, or installation onto a US or EU/UK electrical junction box. It also includes VESA 100 mm spacing for mounting behind a display. This accessory is compatible with the OMNI 600 and 300 Series, as well as the OMNI 200 Series.


תיעוד

חדשות

תמיכה/שאלות נפוצות

HARMAN Professional Solutions: