BSS ACC-MR-NAV10

Daha büyük görseller

The BSS ACC-MR-NAV10 is a rack mount accessory that provides ten vertical slots for installing OMNI Networked AV products in an equipment rack. The ACC-MR-NAV10 occupies up to 8 RU of space, including 6 RU for the enclosure and 2 RU to allow ventilation. It provides active cooling with upper and lower trays of cooling fans to ensure ample air circulation. Any unoccupied slots can be covered with the ACC-MR-NAVB1 accessory panel.

The ACC-MR-NAV10 is compatible with the OMNI 600 and 300 Series, as well as the OMNI 200 Series with two units installed side by side.

İndirmeler

Compliances

	Boyut	Yüklendi
ACC-MR-NAV10 - EU Declaration of Conformity güncellendi: Ağu 2026	598 KB	Ağu 2026
ACC-MR-NAV10 - UKCA Declaration of Conformity güncellendi: Ağu 2026	523 KB	Ağu 2026

Spec Sheets

	Sürüm	Dil	Boyut	Yüklendi
ACC-MR-NAV10 Spec Sheet sürüm A, güncellendi: Tem 2026	A		781 KB	Tem 2026

Quick Start Guides

	Boyut	Yüklendi
ACC-MR-NAV10 - Quick Start Guide güncellendi: Ağu 2026	384 KB	Ağu 2026

Yukarıdaki bağlantılardan herhangi biri tarayıcınızda garip karakterlere yol açıyorsa, dosyayı bilgisayarınıza kaydetmek için dosyaya sağ tıklayın.

Özellikler

Compatible with	OMNI-VE-660 OMNI-VD-660 OMNI-VE-610 OMNI-VD-610 OMNI-VE-330 OMNI-VD-330 OMNI-UE-210* OMNI-UD-210* * Bracket accessory included with these products to allow installation of two units in one slot
Included	Two 1 RU Vented Plates
AC Power Port	IEC C13 Connector
Power Supply	4.0 Amp; 100-240 Volts AC power supply
Environmental	Temperature - 32° to 104°F (0° to 40°C) Humidity - 10% to 90% RH (Non-Condensing) Heat Dissipation - 85 BTU/hr
Product Dimensions (H x W x D)	5.12” x 18.9” x 6.34” (130mm x 480mm x 161mm) 6.9” x 18.9” x 6.34” (175mm x 480mm x 161mm) with 2 RU Venting
Product Weight	10.5 lbs. (Approx. 4.76kg)
SKU Numbers	BSS-MR-NAV10