OMNI-VE-660

4K60 MWC/Dante AV-A & 1080p H.26x Multi-Codec, Dual-Stream Encoder with USB Audio

Grotere afbeeldingen

De BSS OMNI-VE-660 is een uitgebreid uitgeruste AV-over-IP-encoder voor het distribueren van 4K60 4:4:4 video-, audio-, besturings- en USB 2.0-signalen via Gigabit Ethernet, in omgevingen variërend van klaslokalen en vergaderruimten tot rechtszalen, horecagelegenheden en grote bedrijfs- of overheidsfaciliteiten.

De kern van de OMNI-VE-660 is de Motion Wavelet Compression (MWC)-codec, ontwikkeld voor een vlekkeloze beeldkwaliteit en een uiterst lage latentie tussen encoderen en decoderen bij snel bewegend videomateriaal, detailrijke grafische weergave en dynamische visuele content. Daarnaast beschikt de OMNI-VE-660 over gelijktijdige, op standaarden gebaseerde 1080p H.264- of H.265-encodering voor bandbreedte-efficiënte streaming via WAN's of gedeelde netwerken naar apparaten en platforms van derden.

Deze AVoIP-encoder beschikt over USB-C- en HDMI-ingangen met automatische omschakeling en een HDMI loop-uitgang. De USB-C-interface ondersteunt DisplayPort Alt Mode voor video-invoer, USB-data voor de host-pc en opladen tot 100 watt wanneer een standaard USB PD-voeding is aangesloten.

De OMNI-VE-660 biedt USB 2.0-routering en -verlenging via Virtual Network USB 2.0 Hub-technologie. Een host-pc kan communiceren met USB-apparaten op maximaal vier OMNI 600-decoders of OMNI 200 USB-eindpunten, met ondersteuning voor USB 2.0-datasnelheden tot 480 Mbps. Hierdoor kunnen host-pc's communiceren met camera's, conferencing bars, touchdisplays, HID-randapparatuur en andere apparaten op externe locaties binnen het netwerk.

Naast krachtige AV-distributie via het netwerk ondersteunt de OMNI-VE-660 Dante AV-A voor interoperabiliteit met Dante AV-A-decoders van derden. Integrators kunnen OMNI 600-systemen configureren en beheren met Dante Controller, Dante Domain Manager en Dante Director. Bovendien ondersteunt deze encoder tweekanaals Dante-audio-ingang en -uitgang, evenals conversie naar USB-audio (UAC) voor de host-pc.

De OMNI-VE-660 is ontworpen voor moderne professionele AV-installaties en biedt essentiële integratiefuncties zoals voeding op afstand via PoE+, een energiezuinige stand-bymodus, preview van de videobron, aangepaste afbeeldingen en slideshowpresentaties, en open API's voor besturing door derden.

  • HIGH-PERFORMANCE NETWORKED AV DISTRIBUTION

    Powered by Motion Wavelet Compression (MWC), OMNI 600 delivers pristine-quality 4K60 4:4:4 video with ultra-low latency. This ensures high-quality presentation of fast-motion video and high-detail content for demanding AV applications.

  • SIMULTANEOUS SECONDARY H.26x STREAMING

    Simultaneously output a secondary, standards-based 1080p H.264 or H.265 stream, for livestreaming over third-party services, delivering to recording platforms, or distributing to browsers and mobile devices.

  • USB ROUTING OVER IP

    Virtual Network USB 2.0 Hub technology enables a USB host, connected to a host transceiver or encoder, to communicate with USB devices at up to four remote endpoints, with support for high-bandwidth conferencing devices as well as HID peripherals.

  • DANTE AUDIO- EN DANTE AV-A-INTEROPERABILITEIT

    Ingebouwde Dante AV-A-compatibiliteit maakt interoperabiliteit met Dante AV-A-apparaten van derden mogelijk, evenals systeemconfiguratie en -beheer via Dante Controller, Dante Domain Manager en Dante Director. Daarnaast ondersteunt elke encoder en decoder tweekanaals Dante audio-invoer en -uitvoer.

  • NETWERKBEVEILIGING OP ENTERPRISE-NIVEAU

    BSS OMNI AV over IP bevat uitgebreide netwerkbeveiligingsfuncties en normen om te voldoen aan de beveiligings- en operationele vereisten van bedrijfsnetwerken.

  • CENTRALIZED SYSTEM MANAGEMENT

    AVX Suite is the essential resource for BSS OMNI AVoIP system management which includes device discovery and configuration, virtual matrix switching, firmware updates, system monitoring, and more.

HIGH-PERFORMANCE NETWORKED AV DISTRIBUTION

Powered by Motion Wavelet Compression (MWC), OMNI 600 delivers pristine-quality 4K60 4:4:4 video with ultra-low latency. This ensures high-quality presentation of fast-motion video and high-detail content for demanding AV applications.

SIMULTANEOUS SECONDARY H.26x STREAMING

Simultaneously output a secondary, standards-based 1080p H.264 or H.265 stream, for livestreaming over third-party services, delivering to recording platforms, or distributing to browsers and mobile devices.

USB ROUTING OVER IP

Virtual Network USB 2.0 Hub technology enables a USB host, connected to a host transceiver or encoder, to communicate with USB devices at up to four remote endpoints, with support for high-bandwidth conferencing devices as well as HID peripherals.

DANTE AUDIO- EN DANTE AV-A-INTEROPERABILITEIT

Ingebouwde Dante AV-A-compatibiliteit maakt interoperabiliteit met Dante AV-A-apparaten van derden mogelijk, evenals systeemconfiguratie en -beheer via Dante Controller, Dante Domain Manager en Dante Director. Daarnaast ondersteunt elke encoder en decoder tweekanaals Dante audio-invoer en -uitvoer.

NETWERKBEVEILIGING OP ENTERPRISE-NIVEAU

BSS OMNI AV over IP bevat uitgebreide netwerkbeveiligingsfuncties en normen om te voldoen aan de beveiligings- en operationele vereisten van bedrijfsnetwerken.

CENTRALIZED SYSTEM MANAGEMENT

AVX Suite is the essential resource for BSS OMNI AVoIP system management which includes device discovery and configuration, virtual matrix switching, firmware updates, system monitoring, and more.

Kenmerken

  • AV-over-IP encoder for 4K60 4:4:4 video, audio, control, and USB 2.0 over Gigabit Ethernet
  • High-performance MWC codec delivers pristine-quality video with ultra-low latency
  • Simultaneous, standards-based 1080p H.264 or H.265 encoding for bandwidth-efficient streaming
  • USB-C and HDMI inputs with automatic switching and HDMI loop output
  • USB-C interface supports DisplayPort Alt Mode for video input, USB data for host PC, and up to 100 watts charging when a standard USB PD power supply is connected
  • Virtual Network USB 2.0 Hub for routing between a USB host and devices at up to four remote locations
  • Two-channel Dante audio input and output (2x2) with conversion to USB audio (UAC)
  • Dante AV-A enables interoperability with third-party networked AV decoders, plus system management from Dante Controller, Dante Domain Manager, and Dante Director
  • Video preview from the built-in web interface or a touch panel
  • Supports custom image and slideshow presentations
  • PoE+ powered with low-power (standby) mode to conserve energy
  • Enterprise-grade network security and standards including IEEE 802.1x, HTTPS, TLS, AES-256 encryption, LDAP, VLAN tagging, and QoS
  • AVX Suite for OMNI 600 system configuration and management
  • HARMAN HControl and BSS Direct Control provide open APIs for third-party control integration
  • UL2043 certification for plenum space installation

Video's

 

 

 

 

Downloads

Brochures
  Taal Grootte Geüpload
file type icon BSS OMNI Brochure
en bijgewerkt: jul 2026
en  3,85 MB jul 2026
CAD Drawings
  Grootte Geüpload
file type icon OMNI-VE-660 - CAD Drawings
bijgewerkt: aug 2026
17,1 MB aug 2026
Compliances
  Grootte Geüpload
597 KB aug 2026
521 KB aug 2026
Spec Sheets
  Versie Taal Grootte Geüpload
file type icon OMNI-VE-660 Spec Sheet
en versie B, bijgewerkt: aug 2026
en  866 KB aug 2026
Quick Start Guides
  Grootte Geüpload
file type icon OMNI-Vx-660 - Quick Start Guide
bijgewerkt: aug 2026
495 KB aug 2026

Als een van de bovenstaande links resulteert in vreemde tekens in uw browser, klik dan met de rechtermuisknop op het bestand om het op uw computer op te slaan.

Specificaties

Video Inputs HDMI, USB-C
USB-C Cable must support standard Thunderbolt 4.
Video Outputs HDMI Loop Out
Video Resolution Support 480p, 720p, 1080p, 1200p, 1440p, and 4K
*See Appendix in manual
Audio Inputs Embedded Audio on USB-C and HDMI
Analog Stereo (Unbalanced)
Audio Outputs PCM or Dante
HDMI Loop Out
Ports +12V 2A DC power input, (P0) Gigabit Ethernet port with PoE+ support, (P1) Gigabit Ethernet port, (IR Out) 2-pin 3.5mm screw terminal, (RS232) 3-pin 3.5mm screw terminal, (Audio In) 5-pin 3.5mm screw terminal, HDMI video loop output, HDMI video input, USB-C input for video plus USB 2.0 data and power, USB-C PD port - supports up to 100W power for USB-C input – requires external USB PD power supply
Environmental Temperature – 32° to 104°F (0° to 40°C)
Humidity – 10% to 90% RH (non-condensing)
Heat Dissipation – 85 BTU/hr
Dimensions (H x W x D) 1 1/6" x 7 7/8" x 5" (26.6mm x 200mm x 127mm)
Product Weight 2.16 lbs. (Approx. 0.98kg)
SKU Numbers BSS-VE660

Accessoires

ACC-MR-NAV10 | 10 Unit Rack Mount Kit with Active Fan Cooling
ACC-MR-NAV10 Main photo
Grotere afbeeldingen
ACC-MR-NAV10 detail thumbnail #1 ACC-MR-NAV10 detail thumbnail #2 ACC-MR-NAV10 detail thumbnail #3 ACC-MR-NAV10 detail thumbnail #4 ACC-MR-NAV10 detail thumbnail #5 ACC-MR-NAV10 detail thumbnail #6 ACC-MR-NAV10 detail thumbnail #7

The BSS ACC-MR-NAV10 is a rack mount accessory that provides ten vertical slots for installing OMNI Networked AV products in an equipment rack. The ACC-MR-NAV10 occupies up to 8 RU of space, including 6 RU for the enclosure and 2 RU to allow ventilation. It provides active cooling with upper and lower trays of cooling fans to ensure ample air circulation. Any unoccupied slots can be covered with the ACC-MR-NAVB1 accessory panel.

The ACC-MR-NAV10 is compatible with the OMNI 600 and 300 Series, as well as the OMNI 200 Series with two units installed side by side.


Documentatie
ACC-MT-NAV1 | 1 Unit Multi-Mount Kit
ACC-MT-NAV1 Main photo
Grotere afbeeldingen
ACC-MT-NAV1 detail thumbnail #1 ACC-MT-NAV1 detail thumbnail #2 ACC-MT-NAV1 detail thumbnail #3 ACC-MT-NAV1 detail thumbnail #4 ACC-MT-NAV1 detail thumbnail #5

The BSS ACC-MT-NAV1 is an accessory for installing an OMNI AVoIP product below a meeting table, or onto a wall or other surface. It provides a secure, screw-mounted connection that allows simple product removal if necessary. A detachable strain relief plate is included for securing cables into place.

In addition to under-table or surface mounting, the ACC-MT-NAV1 can be used for pole mounting, or installation onto a US or EU/UK electrical junction box. It also includes VESA 100 mm spacing for mounting behind a display. This accessory is compatible with the OMNI 600 and 300 Series, as well as the OMNI 200 Series.


Documentatie

Nieuws

Ondersteuning/FAQ's

HARMAN Professional Solutions: